Make an ear vine or Hollow
Ear Cuff instead of putting on regular earrings to
brighten your ears. An ear vine is definitely an extension of decorative wire that coils up out of your ear piercing, while a cuff sits around the cartilage of
the ear and does not need
a piercing hole. With the proper type of wire along with
a couple of specific jewelry-making tools, you
can begin making as a number of these as you desire, as well as provide
them with to buddies as gifts.
Measure and cut single-inch period
of hypo-allergenic 21-gauge, half-hard
jewelry wire, using wire blades. Half-hard wire is created particularly for jewelry wire-working. It's strong, yet pliable enough to bend with tools.
File the perimeters from the cut finishes to round them off so that they will
not scratch your ears. Wipe the finishes having
a moist cloth to get
rid of the filing dust.
Grip one finish from the wire within the tip from the jaws of a set of round-nose pliers. Rotate
the finish to create a loop and also to eliminate
the cut finish from the wire. Perform the same to another finish from the wire.
Grip the center of the wire around the largest area of
the jaws from the round-nose
pliers and bend the wire to produce
a "U" shape. Slide the wire from the round-nose pliers.
Bend the center of the "U" shape on the round form like a ring mandrel to
create a cuff that's about 3/8 inch across, by having an opening between
your finishes that's about 1/8 inch.
Slip the cartilage of
the ear although the opening within the wire Hollow
Ear Cuff and squeeze looped finishes from
the cuff behind the ridge inside fringe of your ear. This makes the cuff remain
in place.
没有评论:
发表评论